Industrial Rubber Hoses

Approx. Rs 100 / MeterGet Latest Price

Additional Information:

• Item Code: 987654
• Production Capacity: in factory
• Delivery Time: ready
• Packaging Details: bundle

Approx. Rs 80 / MeterGet Latest Price

Additional Information:

• Delivery Time: ready
• Packaging Details: bundle

Approx. Rs 30 / MeterGet Latest Price

Sure! Here’s a quick overview of PVC steel flex hose pipes:

• It’s a flexible hose pipe made from PVC (Polyvinyl Chloride) reinforced with steel wire spirals or mesh.

• The steel reinforcement provides strength, flexibility, and durability.

• PVC provides chemical resistance, lightweight, and corrosion resistance.

• Transporting water, air, or other fluids in industrial, agricultural, or domestic settings.

• Suitable for use in pressure or suction applications.

• Often used for irrigation, water supply, chemical transfer, and air ventilation.

• Flexible and easy to install.

• Resistant to abrasion, corrosion, and chemicals.

• Can handle moderate pressure due to steel reinforcement.

• Longer lifespan compared to plain PVC hoses.

• Diameter: e.g., 1/2 inch to several inches.

• Working pressure rating: e.g., 6 bar to 20 bar.

• Temperature range: usually up to 60-65°C (depends on material quality).

Do you want recommendations for suppliers, technical specs, or uses for a specific industry? Or are you looking to buy?

Additional Information:

• Item Code: 0018
• Packaging Details: bundle

Approx. Rs 30 / MeterGet Latest Price

In the gas industry, an orange hose is the universal standard for LPG (Liquefied Petroleum Gas), which includes Propane and Butane.

The bright orange color is a safety feature designed for high visibility, helping to prevent accidental damage and making it easy to distinguish from water, air, or natural gas lines (which are typically yellow or black).

• Check the Expiry Date: Most gas hoses have a limited lifespan. Look for a date printed on the side of the hose. It is generally recommended to replace them every 2 to 5 years, even if they look fine.

• Inspect for Damage: Check regularly for "cracking" (especially when the hose is bent), stiffness, or swelling. If you see any signs of wear, replace it immediately.

• Avoid "Natural Gas" Use: Never use an orange LPG hose for Natural Gas (mains gas) unless it is explicitly dual-rated. Natural gas hoses are usually yellow or have a yellow stripe.

• Length Matters: Keep the hose as short as possible to reduce the risk of trips or kinks. For caravans or mobile heaters, there are often legal limits on hose length (usually under 1–1.5 meters).

• Secure the Ends: Always use proper hose clips (Jubilee clips) to ensure a gas-tight seal at the regulator and the appliance.

The color serves as a warning. Because LPG is stored under pressure and is heavier than air (meaning it pools on the ground if it leaks), it poses a higher fire risk in certain settings. The orange jacket helps users quickly identify that the line contains a flammable fuel.

Are you looking to replace a hose for a specific appliance, like a BBQ or a camping stove? I can help you find the correct size or fitting type if you can share those details.

Additional Information:

• Item Code: 105

Approx. Rs 50 / MeterGet Latest Price

Here is a sample description for Thunder Spring Hose that you can use for catalogs, product listings, or marketing materials:

Thunder Spring Hose is a high-performance, heavy-duty hose designed to handle tough industrial and agricultural applications. Constructed with a durable, flexible PVC outer layer reinforced with a high tensile steel spring wire, this hose is ideal for suction and delivery of water, chemicals, and light abrasive materials.

• Reinforced Strength: Built with a high-tensile steel wire helix that provides excellent crush resistance and structural integrity.

• Flexibility: Despite its strength, the hose remains lightweight and highly flexible for easy handling and installation.

• Weather & Chemical Resistant: Resistant to most chemicals, moisture, and UV rays, making it suitable for both indoor and outdoor use.

• Clear Transparent Body: Allows easy monitoring of material flow.

• Wide Temperature Range: Performs effectively under a wide temperature range, generally from -5°C to +60°C (custom ranges available).

• Water and light chemical suction/delivery

• Agricultural irrigation systems

• Construction and mining operations

• Liquid transfer in industries

• Dewatering and drainage

Available in sizes ranging from 25mm to 150mm diameter (custom sizes available on request).

Let me know if you want this adapted for a brochure, technical data sheet, or translated into Hindi.

Additional Information:

• Packaging Details: bundle

Approx. Rs 100 / MeterGet Latest Price

Dunlop chemical hoses (often branded as Dunlop Hiflex or Alfagomma) are engineered to safely transport aggressive liquids, acids, and solvents. Because different chemicals react differently to rubber, these hoses use specialized inner linings to prevent the hose from melting or contaminating the fluid.

The "lining" is the most important part of a chemical hose.

• Dunlop XLPE Chemical Hose: Usually has a green or blue cover. It is a "suction and discharge" (S&D) hose, meaning it has a steel wire helix inside so it won't collapse when the pump is sucking liquid out of a tank.

• Dunlop 705AA / 715AA (Alfagomma Range): These are standard industrial chemical hoses often distributed under the Dunlop Hiflex umbrella. They typically handle pressures up to 16 bar (232 psi).

• Composite Chemical Hoses: These aren't made of solid rubber but layers of plastic film and fabric held together by internal and external wire spirals. They are extremely flexible and used frequently for tank truck loading.

• Electrical Conductivity: Most Dunlop chemical hoses include an integrated "static wire" or a conductive cover/tube to prevent sparks when moving flammable solvents.

• Color Coding: Hoses are often color-coded (e.g., Green for Chemical, Yellow for Air) to prevent accidental cross-contamination on a busy worksite.

• Abrasion Resistant Cover: The outer layer is designed to be dragged across concrete docks or factory floors without wearing through to the reinforcement.

Before buying a Dunlop chemical hose, you must know:

1. The Chemical: (e.g., 50% Sulfuric Acid vs. Toluene).

2. Concentration & Temperature: Some hoses handle 10% acid at room temp but fail at 50% acid at 60°C.

3. Pressure: Is it gravity fed or under high pump pressure?

4. Suction: Do you need a wire helix to prevent the hose from flattening?

Would you like me to check the "Chemical Resistance Chart" for a specific substance to see which Dunlop lining you need?

Additional Information:

• Delivery Time: ready at factory
• Packaging Details: bundle

Approx. Rs 550 / PieceGet Latest Price

Here is a clear, professional description for an Anti-Vibration Pad, suitable for catalogs, websites, or quotations:

An anti-vibration pad is a high-quality elastomer or rubber-based isolation pad designed to reduce vibration, shock, and noise generated by machinery and equipment. It is installed beneath machines to prevent vibration transmission to floors and surrounding structures, improving equipment stability and operating comfort.

• Made from durable natural rubber, neoprene, nitrile, or composite elastomers

• Multi-layer or ribbed design for effective vibration damping

• High load-bearing capacity with long service life

• Excellent vibration and shock absorption

• Reduces noise and structural resonance

• Prevents machine movement and floor damage

• Resistant to oil, moisture, and weather

• Easy to install without special tools

• Compressors and generators

• Pumps, motors, and blowers

• HVAC and refrigeration units

• Industrial machinery and equipment

• CNC machines and heavy equipment

✔ Improves machine performance and accuracy
✔ Extends equipment and floor life
✔ Enhances workplace safety and comfort
✔ Cost-effective vibration control solution

If you want:
• Short one-line description
• Load rating / size-based specification
• Heavy-duty or sandwich pad version

Just tell me 👍

Additional Information:

• Delivery Time: READY
• Packaging Details: BOX TYPE

Approx. Rs 40 / MeterGet Latest Price

A PVC braided hose is a type of flexible hose made from PVC (polyvinyl chloride) material reinforced with a braided fiber mesh, typically polyester or nylon. The braided layer adds strength, durability, and resistance to pressure, making the hose suitable for various applications where flexibility and toughness are needed.

• Material: Outer layer of clear or colored PVC for flexibility and chemical resistance.

• Reinforcement: Inner braided mesh (usually polyester or nylon) to increase tensile strength and pressure resistance.

• Durability: Resistant to abrasion, weather, UV rays, and many chemicals.

• Flexibility: Remains flexible even at low temperatures.

• Pressure Capacity: Higher than non-braided PVC hoses due to reinforcement.

• Water supply and irrigation

• Air and gas transfer

• Chemical transportation (depending on compatibility)

• Food and beverage industries (if made from food-grade PVC)

• General industrial use

• Different diameters and lengths

• Transparent or colored PVC

• Different braid materials for specific strength and flexibility requirements

If you want, I can help find specific PVC braided hoses for your needs or explain more about their uses and specifications. What’s your intended use?

Additional Information:

• Item Code: 9898
• Delivery Time: reday in stock
• Packaging Details: bundle ( small roll )

Approx. Rs 150 / MeterGet Latest Price

Dunlop chemical hoses (often branded as Dunlop Hiflex or Alfagomma) are engineered to safely transport aggressive liquids, acids, and solvents. Because different chemicals react differently to rubber, these hoses use specialized inner linings to prevent the hose from melting or contaminating the fluid.

The "lining" is the most important part of a chemical hose.

• Dunlop XLPE Chemical Hose: Usually has a green or blue cover. It is a "suction and discharge" (S&D) hose, meaning it has a steel wire helix inside so it won't collapse when the pump is sucking liquid out of a tank.

• Dunlop 705AA / 715AA (Alfagomma Range): These are standard industrial chemical hoses often distributed under the Dunlop Hiflex umbrella. They typically handle pressures up to 16 bar (232 psi).

• Composite Chemical Hoses: These aren't made of solid rubber but layers of plastic film and fabric held together by internal and external wire spirals. They are extremely flexible and used frequently for tank truck loading.

• Electrical Conductivity: Most Dunlop chemical hoses include an integrated "static wire" or a conductive cover/tube to prevent sparks when moving flammable solvents.

• Color Coding: Hoses are often color-coded (e.g., Green for Chemical, Yellow for Air) to prevent accidental cross-contamination on a busy worksite.

• Abrasion Resistant Cover: The outer layer is designed to be dragged across concrete docks or factory floors without wearing through to the reinforcement.

Before buying a Dunlop chemical hose, you must know:

1. The Chemical: (e.g., 50% Sulfuric Acid vs. Toluene).

2. Concentration & Temperature: Some hoses handle 10% acid at room temp but fail at 50% acid at 60°C.

3. Pressure: Is it gravity fed or under high pump pressure?

4. Suction: Do you need a wire helix to prevent the hose from flattening?

Would you like me to check the "Chemical Resistance Chart" for a specific substance to see which Dunlop lining you need?

Additional Information:

• Delivery Time: reday stock sir
• Packaging Details: bundle

Approx. Rs 50 / MeterGet Latest Price

Dunlop, through its Dunlop Hiflex brand (now part of the Alfagomma Group), produces one of the most extensive ranges of industrial rubber hoses in the world. These are generally categorized by the substance they carry and the pressure they must withstand.

These are the "workhorse" hoses used for general discharge and suction.

• Water Suction & Discharge (Type I & II): Reinforced with high-tensile textile cords and often a steel wire helix to prevent collapsing under vacuum. Used in construction, irrigation, and mines.

• Garden/Washdown Hoses: Typically blue or green, designed for lower pressures (around 10 bar) but high durability against dragging and weather.

• Radiator Hoses: Made of EPDM rubber to handle hot water and antifreeze (up to 120°C) in engine cooling systems.

Designed for air compressors and pneumatic tools.

• Rock Drill Hose: A heavy-duty hose (often yellow or black with a yellow stripe) used in mining and tunneling. It is built to survive high external abrasion and internal oil mist from tool lubrication.

• Pneumatic Tool Hose: Lighter and more flexible, used in workshops and garages for air wrenches and tire inflation.

These are engineered for extreme pressures and usually feature steel wire braiding.

• Wire Braid (e.g., 1SN, 2SN): Compact hoses for medium-to-high pressure hydraulic systems (excavators, forklifts).

• Multi-Spiral (e.g., 4SP, 4SH): Used for very high-pressure applications where the hose must handle pulsating hydraulic surges without failing.

• Steam Hoses: Made from specialized EPDM to handle saturated steam up to 165°C or 210°C without the rubber degrading.

• Chemical & Fuel Hoses: Lined with Nitrile (NBR) or XLPE to resist "sweating" or breaking down when exposed to oil, diesel, or corrosive chemicals.

• Food & Beverage: Non-toxic, FDA-approved hoses (often white or blue-lined) for transferring milk, wine, or vegetable oils.

Would you like me to find a specific technical data sheet or the nearest distributor for a particular hose size?

Additional Information:

• Item Code: 8952456125466
• Delivery Time: REDAY
• Packaging Details: BUNDLE

Approx. Rs 40 / MeterGet Latest Price

Could you please clarify what you mean by "canvas hose pipe"? Are you looking for:

1. A physical product – like a canvas-covered hose (used for water delivery, fire hoses, or irrigation)?

2. An image or diagram – of a canvas hose pipe?

3. Details or specifications – about how it's made, used, or maintained?

4. A project in ChatGPT Canvas – related to hose pipes?

Let me know so I can help more accurately.

Additional Information:

• Item Code: 5565
• Packaging Details: bora packing

Approx. Rs 210 / MeterGet Latest Price

Additional Information:

• Production Capacity: in factory
• Delivery Time: ready
• Packaging Details: bundle and roll

Approx. Rs 150 / MeterGet Latest Price

Approx. Rs 70 / MeterGet Latest Price

A Fire Hose Pipe is a heavy-duty, flexible high-pressure conduit used to transport water or fire-retardant foam to extinguish fires. Because these hoses must perform under extreme conditions, they are designed with a "lay-flat" structure—meaning they are flat when empty for easy storage on reels or in cabinets and expand to a circular shape only when pressurized.

Modern fire hoses use a composite design to balance extreme pressure resistance with portability:

• Inner Liner: A smooth, watertight tube made of EPDM rubber, Polyurethane (PU), or Nitrile. A smooth interior is critical to reduce "friction loss," ensuring water pressure doesn't drop significantly over long distances.

• Reinforcement Jacket: The "muscle" of the hose. This is a woven outer layer made of high-tenacity Polyester or Nylon.

  • Single Jacket: Lighter and more flexible; used for indoor "Rack and Reel" cabinets.

  • Double Jacket: An extra layer of woven fabric provides superior abrasion resistance and higher burst pressure; used by professional fire departments.

• External Coating: Some hoses are impregnated with a Hypalon or Nitrile coating (often red or yellow) to protect against chemicals, heat, and oil.

Additional Information:

• Item Code: 0035
• Production Capacity: ex factory in ahmedabad
• Delivery Time: ready

Approx. Rs 100 / MeterGet Latest Price

A food grade hose pipe is a specially designed hose made from materials that are safe for transporting food and drink products. These hoses are widely used in food processing, breweries, dairies, kitchens, and other environments where hygiene and safety are essential.

1. Materials:

   • Inner lining: Made from non-toxic, FDA-approved materials like:

     • Silicone

     • PVC (Polyvinyl Chloride)

     • EPDM (Ethylene Propylene Diene Monomer)

     • NBR (Nitrile Butadiene Rubber)

   • Reinforcement: Often reinforced with synthetic yarn or steel wire for pressure resistance.

2. Safety Certifications:

   • FDA (U.S. Food and Drug Administration)

   • EU 10/2011 (European Union food safety regulation)

   • NSF (National Sanitation Foundation)

3. Temperature Range:

   • Can typically handle -30°C to +120°C (or more), depending on the hose type.

4. Odorless and Tasteless:

   • Does not impart taste or odor to food or liquids.

5. Flexibility and Durability:

   • Often kink-resistant and UV-resistant, suitable for both indoor and outdoor use.

6. Easy to Clean:

   • Smooth inner walls to prevent buildup and allow easy flushing and sanitation.

• Beverage transfer (wine, beer, juice)

• Dairy (milk processing)

• Potable water lines (RV, boats, mobile catering)

• Food processing plants

• Pharmaceuticals (in some cases)

• Alfaflex

• Trelleborg – e.g., Lactadial (for dairy)

• Saint-Gobain – Versilon™ series

• Novaflex – 6506 series (for beer and wine)

• Kuriyama – Tigerflex™ series

Would you like help finding a specific hose type for your use (e.g., beer brewing, dairy, high temp)? I can assist in comparing models or finding vendors.

Additional Information:

• Item Code: 0020
• Production Capacity: ex delivery
• Delivery Time: ready
• Packaging Details: bundle

Approx. Rs 300 / MeterGet Latest Price

Here’s a clear description of Gates chemical hose — a type of industrial hose specifically made for transferring chemical fluids safely:

A Gates Chemical Hose is a specialized industrial hose designed to transfer or convey chemical liquids such as acids, alkalis, solvents and other hazardous or corrosive substances in industrial settings. It’s engineered to resist chemical attack, abrasion, temperature extremes, and pressure during use. (Gates)

These hoses are widely used in chemical plants, tanker loading/unloading, storage tank transfer, and general chemical handling applications where standard hoses would fail due to corrosion or degradation. (Gates)

A Gates chemical hose generally consists of the following layers:

• Inner tube: Chemical-resistant material such as EPDM rubber, cross-linked polyethylene (XLPE), UHMWPE, FEP or other polymers depending on chemical compatibility. (Gates)

• Reinforcement: Multiple layers of high-strength synthetic yarn or textile cord and often a wire helix for vacuum/suction capability and pressure resistance. (Gates)

• Outer cover: Durable, abrasion-resistant rubber (often EPDM) that protects from weather and mechanical wear. (Gates)

This multi-layer design gives the hose flexibility, strength and chemical resilience needed in demanding industrial environments. (Gates)

📌 Chemical Compatibility
Gates chemical hoses are designed to handle a wide range of fluids including dilute acids, bases and other corrosive media. For specific chemical handling, you should consult Gates’ chemical resistance tables or a representative to choose the right hose. (Gates)

📌 Temperature Range
Depending on the specific hose model:

• Typical range for standard chemical hoses: ~-40 °C to +100 °C (-40 °F to +180 °F). (Gates)

• For heavy-duty hoses like Chem Master™ Plus XLPE, ranges up to around +121 °C (250 °F). (Gates)

📌 Pressure & Suction
Reinforced hoses often support both pressure delivery and suction duties, with working pressures and vacuum ratings varying by model. (Gates)

📌 Standards Compliance
Many Gates chemical hoses meet industrial standards such as IS:7654 (Indian standard) and other quality benchmarks. (Gates)

✔ Transfer of dilute chemical solutions like caustic soda, alum liquor or sulphuric acid. (Gates)
✔ Loading/unloading of chemicals from tankers, barges or storage tanks. (Gates)
✔ Chemical process plants and industrial facilities. (Gates)

• Always choose the right hose material for the specific chemical you’re handling — incorrect selection can lead to rapid deterioration or dangerous failure. (Gates)

• Regular inspection and maintenance are critical since chemical hoses can degrade over time with use. (Gates)

If you want, I can also help you choose the right Gates chemical hose model based on the specific chemical, temperature, and pressure you’re working with!

Additional Information:

• Item Code: 45646513
• Delivery Time: reday
• Packaging Details: bundle

Approx. Rs 200 / MeterGet Latest Price

A sandblast hose (or abrasive blasting hose) is a heavy-duty, reinforced rubber hose designed to convey highly abrasive materials—like sand, steel shot, or glass beads—at high velocities.¹

Unlike standard air or water hoses, these are engineered to survive "internal erosion" caused by the media scraping against the inner walls.²

To handle the extreme friction and pressure, these hoses use a specific "sandwich" of materials:

•  Inner Tube (Abrasive Layer): The most critical part.⁴ It is made of thick, smooth synthetic or natural rubber (often NR, SBR, or BR blends) with high abrasion resistance.⁵ It must be conductive to prevent the buildup of static electricity caused by the friction of the sand.⁶

  +2

   

•  Reinforcement Layer: Multiple layers of high-tensile textile cords or synthetic fabric.⁷ This provides the structural strength to handle high working pressures (typically 175–300 PSI) without bursting.⁸

  +1

   

•  Outer Cover: Made of weather, ozone, and scuff-resistant rubber.⁹ It is often "pin-pricked" to allow gases to escape and prevent the cover from blistering.¹⁰

  +1

   

•  Bull Hose: A large-diameter hose that carries only air from the compressor to the blast pot.¹¹

   

• Blast Hose: The main hose carrying the air-and-sand mixture from the pot toward the nozzle.¹²

   

•  Whip Hose: A shorter, more flexible section (usually 10–15 feet) at the very end.¹³ It is lighter and easier for the operator to maneuver, though it wears out faster than the main hose.

   

Additional Information:

• Item Code: 6598565
• Delivery Time: readt
• Packaging Details: bundle

Approx. Rs 45 / MeterGet Latest Price

Sure! Here’s a quick overview of PVC steel flex hose:

• PVC steel flex hose is a type of flexible hose made from PVC (Polyvinyl Chloride) reinforced with a steel wire spiral inside.

• The steel wire provides strength and durability, while the PVC outer layer offers flexibility, chemical resistance, and weather resistance.

• It’s designed to handle various applications that require both flexibility and pressure resistance.

• Water and fluid transfer

• Air and gas lines

• Chemical handling (depending on the PVC grade)

• Industrial and agricultural uses

• Vacuum and suction applications

• Lightweight but strong

• Resistant to abrasion and corrosion

• Can withstand moderate pressure and suction

• Flexible for easy handling and installation

• Transparent or colored options available

• Diameter ranges from small (e.g., 1/2 inch) to large (several inches)

• Working pressure depends on hose diameter and construction (often from a few bar/psi up to moderate pressures)

• Temperature range usually from -10°C to +60°C (varies by manufacturer)

If you want, I can help you find suppliers, specs for a specific size, or help compare it to other types of hoses! What’s your exact use or requirement?

Approx. Rs 100 / MeterGet Latest Price

licone Rubber Hose is a high-performance flexible conduit designed for environments that experience extreme temperature fluctuations. Unlike traditional organic rubber hoses, silicone is a synthetic elastomer that remains stable, flexible, and non-reactive under conditions that would cause other materials to melt, crack, or become brittle.

Industrial-grade silicone hoses typically utilize a multi-layered design to handle pressure and maintain shape:

• Inner Core: Made of high-purity silicone. For specific oil or fuel resistance (which standard silicone lacks), it can be lined with Fluorosilicone.

• Reinforcement Layer: To prevent the hose from bursting or expanding under pressure, layers of fabric are embedded.

  • Polyester: Most common for temperatures up to 180°C.

  • Nomex® / Aramid: Used for high-heat applications up to 250°C+.

  • Wire Helix: A steel wire coil is often added for suction applications to prevent the hose from collapsing under vacuum.

• Outer Cover: A smooth or "cloth-finish" silicone layer that protects against UV, ozone, and environmental wear.

Approx. Rs 40 / MeterGet Latest Price

Approx. Rs 60 / MeterGet Latest Price

Approx. Rs 110 / MeterGet Latest Price

Approx. Rs 20 / MeterGet Latest Price

It looks like you’re asking about polyurethane hose pipes! Here’s a quick overview:

• Material: Made from polyurethane, which is a durable, flexible, and lightweight polymer.

• Properties: Known for excellent abrasion resistance, flexibility, and good resistance to oils, fuels, and chemicals.

• Applications: Used in industrial settings, pneumatic systems, fluid transfer, and sometimes in garden hoses or air tools.

• Advantages:

  • Highly resistant to kinks and cracks.

  • Can handle pressure and rough conditions better than many other materials.

  • Lightweight and easy to handle.

• Pneumatic air lines (like for air compressors)

• Hydraulic fluid transfer

• Chemical and fuel lines

• Water transfer in industrial and agricultural contexts

If you want, I can help you find specific types or suppliers, or answer questions about sizing, compatibility, or how to maintain these hoses. What exactly are you looking for?

Additional Information:

• Item Code: 0055
• Production Capacity: ready

Approx. Rs 80 / MeterGet Latest Price

Steam rubber hoses are specialized industrial tools designed to handle the extreme heat and pressure of saturated or superheated steam. While they look similar to hydraulic hoses, they are chemically and structurally different to prevent "popcorning" and catastrophic bursts.

Most steam hoses use EPDM (Ethylene Propylene Diene Monomer) for the inner tube and outer cover.

• Heat Resistance: EPDM can withstand continuous temperatures up to +210°C (410°F), whereas standard hydraulic rubber often fails above $100$°C.

• Anti-Aging: It resists "cracking" or hardening that occurs when rubber is repeatedly exposed to high-heat moisture.

• The "Oil Resistance" Exception: Standard EPDM is destroyed by oil. If your environment involves grease or petroleum, you must specify a Chlorobutyl or oil-resistant EPDM cover (often marked as Class B).

Steam hoses are generally divided into two types based on their performance:

The biggest danger with steam hoses is an internal failure called "popcorning." 1. Steam penetrates the microscopic pores of the rubber tube.

2. When the system is turned off, the steam cools and turns back into water trapped inside the rubber.

3. The next time the hose is heated, that trapped water flashes back into steam instantly, expanding and creating "popcorn-like" blisters that eventually rupture the hose.

Safety Tip: Always drain the hose after every use to prevent water from being trapped in the liner.

• Safety Factor: Unlike hydraulic hoses (4:1), high-quality steam hoses often have a safety factor of 10:1 because a steam burst is significantly more dangerous than an oil leak.

• Pin-Pricked Cover: Look closely at the outer cover; high-quality steam hoses have tiny "pin-pricks." These are intentional, allowing small amounts of trapped gas to escape safely rather than forming blisters.

• Fittings: Never use standard worm-gear hose clamps. Use interlocking bolted clamps specifically rated for steam to ensure the coupling doesn't fly off under pressure.

Would you like me to help you cross-reference a specific part number or explain the difference between saturated and superheated steam ratings?

Approx. Rs 40 / MeterGet Latest Price

Approx. Rs 60 / MeterGet Latest Price

Approx. Rs 80 / MeterGet Latest Price

Approx. Rs 150 / MeterGet Latest Price

Approx. Rs 450 / MeterGet Latest Price

Additional Information:

• Production Capacity: imported matetrial
• Delivery Time: ready

Approx. Rs 100 / PieceGet Latest Price

Stainless steel (SS) corrugated hose pipes—often referred to as flexible metal hoses or SS bellows—are high-performance conduits designed for industries where standard rubber or plastic hoses would fail due to heat, pressure, or chemical corrosion.

The "corrugated" design refers to the series of ridges and grooves (bellows) along the pipe's length, which provide the flexibility to bend and absorb vibrations without breaking.

A standard assembly typically consists of three layers:

• Corrugated Inner Tube: The core flexible part made from stainless steel (commonly SS304, SS316L, or SS321).

• Wire Braid: An outer layer of woven stainless steel wire. This prevents the hose from elongating under internal pressure and provides mechanical protection.

• End Fittings: Connectors (flanges, threads, or camlocks) welded to the ends for installation into a piping system.

The way the "waves" are formed affects how the hose performs:

• Annular Corrugations: Parallel rings. These are the most common because they are easier to install and better at handling pressure shocks.

• Helical Corrugations: A continuous spiral. These offer slightly better flexibility and flow but are less common for high-pressure industrial applications.

Because they are fireproof and leak-proof, they are used in:

• Oil & Gas: Transporting fuels and chemicals under high pressure.

• HVAC Systems: Connecting pumps and chillers to absorb vibration and noise.

• Steam Lines: Handling high-temperature steam in power plants and laundries.

• Cryogenics: Carrying liquid nitrogen or oxygen at extremely low temperatures.

• Food & Pharma: Used where hygiene and non-reactive materials are required (often with "Food Grade" certification).

• Vibration Absorption: They act as "shock absorbers" for pumps and compressors.

• Thermal Expansion: They compensate for pipes that expand or contract as they heat up and cool down.

• Permeation Proof: Unlike rubber or plastic, gases cannot leak through the metal wall.

• Fire Safety: They maintain integrity during a fire, unlike synthetic hoses that melt.

Would you like me to help you find the correct hose diameter or pressure rating for a specific piece of equipment?

Approx. Rs 180 / MeterGet Latest Price

• It’s a flexible hose made from rubber specifically designed to carry petrol (gasoline) safely.

• These hoses are reinforced to resist fuel, pressure, heat, and environmental conditions.

• Used in vehicles, machinery, and fuel systems.

• Fuel Resistance: Must be compatible with petrol and other hydrocarbons.

• Temperature Range: Should withstand engine or ambient heat.

• Pressure Rating: Able to handle fuel pump pressure.

• Durability: Resistant to abrasion, ozone, and weather.

• Fuel lines in cars, motorcycles, and boats.

• Fuel transfer and dispensing systems.

• Small engines and machinery fuel lines.

Approx. Rs 150 / MeterGet Latest Price

It looks like you're asking about oil and resistance hose — possibly referring to a hose that resists oil or a hose used to carry oil while resisting wear, pressure, or heat. Here's a quick breakdown of the possibilities:

These are hoses made to resist degradation when exposed to oils, fuels, and greases — commonly used in industrial, automotive, or hydraulic settings.

• Materials: Nitrile rubber (NBR), Viton, EPDM, or PVC with special coatings

• Reinforcement: Braided textile or steel wire for high pressure

• Temperature resistance: Often rated -40°C to 120°C or more

• Oil Resistance: Special linings prevent swelling, cracking, or degradation

Used to transfer oil (lubricants, hydraulic oils, fuels, etc.) safely and efficiently.

• Hydraulic systems

• Automotive fuel/oil lines

• Industrial machinery

• Marine and offshore rigs

• Oil resistance

• Abrasion resistance

• Pressure resistance

• Heat resistance

• Chemical resistance

If you have a specific application in mind (e.g., for a car, industrial machine, or marine use), let me know, and I can help you choose the right hose or standard.

Approx. Rs 80 / MeterGet Latest Price

Dunlop Pneumatic Tool Hose Pipe is a specialized hose designed for delivering compressed air to power pneumatic tools like air drills, impact wrenches, grinders, sanders, etc. Here's a detailed overview:

Dunlop Pneumatic Tool Hose Pipe

• Brand: Dunlop (known for high-quality industrial rubber products)

• Construction: Typically 2 or 3 layers (inner tube, reinforcement, outer cover)

• Material:

  • Inner Tube: Nitrile / Synthetic Rubber

  • Reinforcement: High-tensile synthetic yarn / polyester

  • Outer Cover: Weather, abrasion, and oil-resistant rubber

• Lightweight & flexible

• Withstands rough site handling

• Long service life in harsh conditions

• Oil and abrasion resistant

• Ideal for air compressors and pneumatic tools

• Industrial workshops

• Auto garages & service stations

• Construction sites

• Shipyards and fabrication units

• Dunlop Air Tool Hose

• Dunlop Rubber Pneumatic Hose

• Dunlop Yellow Air Hose

Would you like help drafting an Indiamart product description, pricing details, or a catalog entry?

Additional Information:

• Delivery Time: reday stock s
• Packaging Details: bundle

Approx. Rs 20 / MeterGet Latest Price

Recommended for heavy duty, high-pressure use on industrial construction and pneumatic mining applications requiring an extra heavy duty hose with an oil resistant tube and abrasion resistant cover. 

Additional Information:

• Production Capacity: large
• Delivery Time: ready
• Packaging Details: bundle

Approx. Rs 65 / MeterGet Latest Price

Here’s a professional description of a Dunlop Pneumatic Hose, suitable for catalogs, websites, or industrial product listings:

The Dunlop Pneumatic Hose is a high-quality, flexible air hose designed for use in compressed air and pneumatic systems. Manufactured from premium-grade rubber with reinforced layers, it provides excellent strength, flexibility, and durability, making it ideal for heavy-duty industrial applications.

• High Flexibility:
  Designed to remain flexible even under varying temperature and pressure conditions, ensuring easy handling.

• Strong Reinforcement:
  Reinforced with high-tensile synthetic textile or braided yarn for superior pressure resistance and kink-free performance.

• Oil and Abrasion Resistant:
  Outer layer is made from abrasion and weather-resistant rubber, ensuring long service life in rugged environments.

• Reliable Performance:
  Maintains consistent air flow and pressure with minimal leakage, ensuring efficiency in pneumatic operations.

• Durable Dunlop Quality:
  Engineered to meet Dunlop’s global standards for strength, reliability, and safety.

• Compressed air lines and pneumatic tools

• Automotive workshops and service stations

• Construction and mining sites

• Paint spraying and cleaning equipment

• General industrial air supply lines

• Long-lasting and durable construction

• Excellent flexibility and easy installation

• Resistant to oil, abrasion, and weathering

• Suitable for continuous industrial use

Would you like me to make this version shorter and more marketing-oriented (for a product catalog or brochure) or more detailed and technical (for a specification sheet)?

Additional Information:

• Item Code: 65254585
• Delivery Time: reday stock
• Packaging Details: BUNDLE

Approx. Rs 50 / mtrGet Latest Price

A pneumatic tool hose (commonly called an air hose) is the flexible lifeline connecting an air compressor to tools like impact wrenches, nail guns, and sandblasters. Unlike the rigid tubing used for fixed plumbing, these hoses are designed for movement, durability, and high-speed airflow.

The material you choose determines how the hose handles temperature, weight, and "memory" (the tendency of a hose to stay curled).

For pneumatic tools, Inside Diameter (ID) is the most important measurement because it determines the volume of air (CFM) reaching the tool.

• 1/4" (6mm) ID: Best for small, low-demand tools like brad nailers, airbrushes, or tire inflators.

• 3/8" (10mm) ID: The industry standard. It provides enough air for most impact wrenches, grinders, and larger nailers without being too heavy.

• 1/2" (13mm) ID: Used for high-demand industrial tools like 1-inch impact wrenches or heavy-duty sandblasting units.

Pro Tip: As hose length increases, pressure drops. If you need a 100-foot run, use a 3/8" hose instead of 1/4" to ensure your tool still has enough power at the end of the line.

• Straight Hose: The most common. Usually stored on a hose reel or coiled by hand. Best for long-distance reach.

• Coiled (Recoil) Hose: Designed like a telephone cord to snap back when not in use. Excellent for keeping workstations tidy, but they can restrict airflow and are harder to pull over long distances.

• Lead-In (Whip) Hose: A short 3–6 foot section of heavy rubber hose used between the tool and the main line to absorb vibrations and protect the main hose from damage.

Additional Information:

• Item Code: 0025656
• Production Capacity: rubber hose
• Delivery Time: ready in stock
• Packaging Details: bundle packaging

Approx. Rs 200 / MeterGet Latest Price

High-pressure steam hoses are specialized industrial tools designed to handle the extreme thermal and mechanical stresses of saturated and superheated steam. Unlike standard water or air hoses, they are built to prevent "popcorning" (internal blisters) and catastrophic bursts that can occur at high temperatures.

Most high-pressure steam hoses are classified under international standards like ISO 6134, which divides them into two main types:

• Inner Tube: Typically made of EPDM (Ethylene Propylene Diene Monomer) or Chlorobutyl. These materials offer excellent resistance to heat and aging.

• Reinforcement: High-pressure variants use one or two layers of braided steel wire. This provides the structural integrity needed to prevent the hose from expanding or bursting under pressure.

• Outer Cover: Usually EPDM, which is heat, ozone, and weather-resistant.

  • Pin-pricking: Critical for safety; the outer cover is often "pin-pricked" (tiny holes) to allow gases to escape, preventing the cover from blistering or separating from the reinforcement.

  • Classes: Class A (Non-oil resistant) or Class B (Oil-resistant for refinery use).

• Industrial Cleaning: Thawing, blow-out service, and cleaning in refineries and shipyards.

• Manufacturing: Delivering steam to molding machines, vulcanizers, and autoclaves.

• Food & Chemical: Sterilization (SIP/CIP processes) and heat control in processing plants.

• Foundries/Steel Mills: High-heat environments requiring heavy-duty durability.

Steam is one of the most dangerous industrial media due to its latent heat and invisibility.

• Avoid "Superheated" Steam: Most rubber steam hoses are rated for saturated steam. Exposure to superheated steam (which is hotter than the saturation point) can rapidly "cook" the rubber, making it brittle and prone to failure.

• Static Dissipation: Ensure the hose is electrically bonded or conductive (marked with "M" or "Ω") to prevent static buildup during high-velocity steam flow.

• Daily Inspection: Look for "kinking," external abrasions, or wire mesh exposure. If you see "popcorning" inside the tube, the hose must be replaced immediately.

• Drain After Use: Leaving water (condensate) in the hose can cause "water hammer" when the steam is turned back on, which can rupture the hose.

Would you like me to help you find a specific size or pressure rating for a particular industrial application?

Additional Information:

• Packaging Details: rolll

Approx. Rs 150 / MeterGet Latest Price

A Steam Hose Pipe is a specialized, heavy-duty industrial hose designed to safely transport saturated and superheated steam. Unlike standard water hoses, steam hoses are engineered to withstand the extreme "triad of destruction": high temperature, high pressure, and the risk of internal expansion (popcorning).

To manage the volatility of steam, these hoses follow a strict three-layer architecture:

• Inner Tube: Almost exclusively made of EPDM (Ethylene Propylene Diene Monomer) or Chlorobutyl rubber. These materials resist hydrolysis (breakdown by water/steam) and heat aging.

• Reinforcement: Typically consists of one or two layers of high-tensile braided steel wire. This provides the structural integrity to prevent the hose from bursting under high pressure.

• Outer Cover: Usually a red or black EPDM synthetic rubber. It is pin-pricked (tiny holes) to allow trapped gases to escape, preventing blisters or "bubbles" on the surface.

One of the unique risks with steam hoses is popcorning. When a hose cools down after use, trapped steam condenses into water and is absorbed by the porous rubber tube. When the hose is reheated, this water instantly expands back into steam, tearing the inner lining and creating damage that looks like the surface of popcorn.

Critical Tip: Always drain the hose after use to prevent this phenomenon and extend its life.

• Industrial Cleaning: Thawing, blowout services, and high-pressure steam cleaning in refineries and shipyards.

• Chemical/Food Processing: Sterilization of tanks, heating jackets for reactors, and CIP (Clean-In-Place) systems.

• Power Plants: Connecting steam lines for turbines or auxiliary heating systems.

• Civil Engineering: Steam-driven pile drivers and concrete curing.

1. Check for "Pin-Pricking": Ensure the outer cover has tiny visible holes; if not, it is likely not a genuine steam hose and may blister.

2. Use Steam-Specific Fittings: Never use standard worm-gear clamps. Use interlocking bolt-type clamps or permanently swaged ferrules.

3. Monitor for "Hardening": If the hose feels stiff or "cracks" when bent, the rubber has heat-aged and must be replaced immediately.

4. Avoid Kinking: A kink creates a localized "hot spot" that can weaken the steel reinforcement and cause a catastrophic burst.

Would you like me to help you calculate the specific pressure rating you need based on your boiler's output temperature?

Additional Information:

• Item Code: 52246456123
• Delivery Time: ready
• Packaging Details: bundle

Approx. Rs 100 / MeterGet Latest Price

Approx. Rs 25 / MeterGet Latest Price

A pneumatic tool hose (commonly called an air hose) is the flexible lifeline connecting an air compressor to tools like impact wrenches, nail guns, and sandblasters. Unlike the rigid tubing used for fixed plumbing, these hoses are designed for movement, durability, and high-speed airflow.

The material you choose determines how the hose handles temperature, weight, and "memory" (the tendency of a hose to stay curled).

For pneumatic tools, Inside Diameter (ID) is the most important measurement because it determines the volume of air (CFM) reaching the tool.

• 1/4" (6mm) ID: Best for small, low-demand tools like brad nailers, airbrushes, or tire inflators.

• 3/8" (10mm) ID: The industry standard. It provides enough air for most impact wrenches, grinders, and larger nailers without being too heavy.

• 1/2" (13mm) ID: Used for high-demand industrial tools like 1-inch impact wrenches or heavy-duty sandblasting units.

Pro Tip: As hose length increases, pressure drops. If you need a 100-foot run, use a 3/8" hose instead of 1/4" to ensure your tool still has enough power at the end of the line.

• Straight Hose: The most common. Usually stored on a hose reel or coiled by hand. Best for long-distance reach.

• Coiled (Recoil) Hose: Designed like a telephone cord to snap back when not in use. Excellent for keeping workstations tidy, but they can restrict airflow and are harder to pull over long distances.

• Lead-In (Whip) Hose: A short 3–6 foot section of heavy rubber hose used between the tool and the main line to absorb vibrations and protect the main hose from damage.

Additional Information:

• Delivery Time: ready
• Packaging Details: bundle