Hose Clamp

Approx. Rs 10 / PieceGet Latest Price

When standard "worm-gear" (radiator) clamps fail, heavy-duty hose clamps are required. These are designed for high-pressure, high-vibration, or thick-walled hoses (like the PVC suction or hydraulic hoses we discussed) where a tight, uniform seal is critical to prevent leaks or "blow-offs."

The T-bolt is the most common heavy-duty clamp. Instead of a perforated band and a screw, it uses a solid steel band and a high-tensile bolt.

• Design: A bolt passes through a swivel "T" and is tightened with a hex nut.

• Advantage: It provides significantly higher torque and 360° uniform pressure. It won't "strip" like a cheap worm gear.

• The Bridge: Look for T-bolts with a "floating bridge" or "tongue" that fits under the bolt mechanism. This prevents the hose from being pinched or "bunched up" during tightening.

• W1 (Zinc Plated): Only for dry, indoor environments. They will rust quickly if exposed to moisture.

• W4 (SS 304): The standard for most industrial and outdoor use. Good balance of strength and rust resistance.

• W5 (SS 316): Mandatory for marine, chemical, or offshore environments where salt or acids are present.

Unlike worm-gear clamps, which have a wide range (e.g., 2" to 4"), heavy-duty clamps have a very narrow adjustment range (often only 3mm to 5mm).

Important: To size a T-bolt clamp, you must measure the Outside Diameter (OD) of the hose after it has been pushed onto the fitting. If the hose is $50$mm ID and has a $5$mm wall, your total OD is $60$mm. You would need a clamp with a range like 58mm–63mm.

• Avoid the Impact Driver: While tempting, using an impact wrench on T-bolts can "galling" (weld) the stainless steel threads together, making the clamp impossible to remove or tighten further. Use a hand socket wrench.

• Torque Specs: Most T-bolt clamps have a torque rating (e.g., $85$ in-lb). Over-tightening can crush the rigid helix of a suction hose or "cold flow" the rubber, actually causing a leak later.

• Double Clamping: On critical lines (like a boat's thru-hull fitting), it is standard practice to use two heavy-duty clamps with the bolts offset by $180$° for maximum security.

Would you like me to help you find the correct clamp size based on your hose's inner diameter and wall thickness, or are you looking for the torque specifications for a specific brand?

Additional Information:

• Item Code: 0000145
• Production Capacity: hose pipe
• Delivery Time: ready
• Packaging Details: bundle

Approx. Rs 20 / PieceGet Latest Price

A T-Bolt Clamp is a heavy-duty hose clamp designed to provide a strong, secure, and uniform seal on hoses in high-pressure applications. It is commonly used in industrial, automotive, agricultural, and marine sectors.

• Design: It consists of a stainless steel band with a T-shaped bolt and a lock nut for tightening.

• Material: Usually made from stainless steel or galvanized steel for corrosion resistance.

• Size Range: Available in various sizes to suit different hose diameters.

• Strength: Provides high clamping force and uniform pressure around the hose.

• Application: Ideal for high-pressure hoses, turbocharger systems, coolant systems, and industrial ducting.

1. Automotive: Turbo hoses, radiator hoses, intercooler systems.

2. Industrial: Air and fluid transfer systems.

3. Agriculture: Irrigation and machinery hoses.

4. Marine: Fuel and coolant hoses.

✅ Advantages:

• Stronger than standard worm-drive clamps.

• Resistant to vibration and thermal expansion.

• Long-lasting and reusable.

If you’d like, I can help you create a product description, catalogue content, or marketing material for T-Bolt Clamps. Just let me know!

Additional Information:

• Delivery Time: ready
• Packaging Details: bundle

Approx. Rs 25 / PieceGet Latest Price

Approx. Rs 50 / PieceGet Latest Price

A brass hose nipple is a short piece of brass pipe or fitting with male threads on both ends. It’s used to connect two female-threaded hose fittings or pipes together. Brass is commonly used because it’s durable, corrosion-resistant, and works well with water, air, and other fluids.

Typical uses:

• Joining garden hoses or irrigation pipes

• Connecting plumbing fixtures

• Extending hose lengths by linking two hoses

If you want, I can help you find sizes, specs, or where to buy one. What exactly do you need it for?

Approx. Rs 55 / PieceGet Latest Price

Approx. Rs 50 / PieceGet Latest Price

Approx. Rs 40 / PieceGet Latest Price

When standard "worm-gear" (radiator) clamps fail, heavy-duty hose clamps are required. These are designed for high-pressure, high-vibration, or thick-walled hoses (like the PVC suction or hydraulic hoses we discussed) where a tight, uniform seal is critical to prevent leaks or "blow-offs."

The T-bolt is the most common heavy-duty clamp. Instead of a perforated band and a screw, it uses a solid steel band and a high-tensile bolt.

• Design: A bolt passes through a swivel "T" and is tightened with a hex nut.

• Advantage: It provides significantly higher torque and 360° uniform pressure. It won't "strip" like a cheap worm gear.

• The Bridge: Look for T-bolts with a "floating bridge" or "tongue" that fits under the bolt mechanism. This prevents the hose from being pinched or "bunched up" during tightening.

• W1 (Zinc Plated): Only for dry, indoor environments. They will rust quickly if exposed to moisture.

• W4 (SS 304): The standard for most industrial and outdoor use. Good balance of strength and rust resistance.

• W5 (SS 316): Mandatory for marine, chemical, or offshore environments where salt or acids are present.

Unlike worm-gear clamps, which have a wide range (e.g., 2" to 4"), heavy-duty clamps have a very narrow adjustment range (often only 3mm to 5mm).

Important: To size a T-bolt clamp, you must measure the Outside Diameter (OD) of the hose after it has been pushed onto the fitting. If the hose is $50$mm ID and has a $5$mm wall, your total OD is $60$mm. You would need a clamp with a range like 58mm–63mm.

• Avoid the Impact Driver: While tempting, using an impact wrench on T-bolts can "galling" (weld) the stainless steel threads together, making the clamp impossible to remove or tighten further. Use a hand socket wrench.

• Torque Specs: Most T-bolt clamps have a torque rating (e.g., $85$ in-lb). Over-tightening can crush the rigid helix of a suction hose or "cold flow" the rubber, actually causing a leak later.

• Double Clamping: On critical lines (like a boat's thru-hull fitting), it is standard practice to use two heavy-duty clamps with the bolts offset by $180$° for maximum security.

Would you like me to help you find the correct clamp size based on your hose's inner diameter and wall thickness, or are you looking for the torque specifications for a specific brand?

Approx. Rs 5 / PieceGet Latest Price

1. Screw/Band (Worm Drive) Clamp: Most common; features a screw that tightens a metal band.

2. Spring Clamp: Uses the tension in a spring to maintain pressure.

3. Ear Clamp (Oetiker Clamp): Has "ears" that are crimped to tighten.

4. Wire Clamp: Made from a heavy wire bent into a U shape and tightened with a bolt.

5. T-Bolt Clamp: Heavy-duty version for high-pressure applications, often found in turbocharged engines.

• Securing radiator hoses in cars.

• Connecting air or fuel lines.

• Fastening hoses in washing machines and dishwashers.

• Agricultural and marine equipment.

Would you like help choosing the right type or size for a specific application?

Approx. Rs 15 / PieceGet Latest Price

Approx. Rs 20 / PieceGet Latest Price

A wire hose clamp is a type of clamp made from a loop of steel wire, usually galvanized or stainless steel, designed to secure hoses onto fittings such as pipes or tubes. It works by tightening the wire around the hose, providing a firm grip without damaging the hose material.

• Material: Typically steel wire, sometimes stainless steel for corrosion resistance.

• Design: Simple loop with a tightening mechanism, often a screw or a spring action.

• Usage: Common in automotive, plumbing, and general machinery applications where flexible hose connections are needed.

• Advantages: Lightweight, low cost, easy to install and adjust.

• Limitations: Usually less strong than band clamps; not ideal for high-pressure applications.

• Securing fuel lines

• Attaching vacuum hoses

• Connecting garden hoses

Approx. Rs 15 / PieceGet Latest Price

Approx. Rs 75 / PieceGet Latest Price

A Double Bolt MCI Clamp (Malleable Cast Iron Clamp) is a heavy-duty, two-piece industrial hose clamp designed for high-pressure and high-vibration environments. It is the primary choice for securing thick-walled hoses where standard worm-gear clamps would fail.

• Material: Made from Malleable Cast Iron (MCI), which is heat-treated to ensure it is tough and ductile, meaning it will bend rather than snap under extreme tension.

• Two-Piece Design: Consists of two identical semi-circular shells that wrap around the hose. This ensures equal pressure distribution $360^{\circ}$ around the hose circumference.

• Hardware: Features two high-tensile steel bolts and nuts. The bolts are usually seated in "lugs" that prevent them from turning during tightening.

• Inner Surface: The interior of the clamp usually features interlocking ridges or "gripping teeth" that bite into the hose cover to prevent "hose blow-off."

Additional Information:

• Delivery Time: ready
• Packaging Details: box packing